Week 7 meeting 5/14/15

During the meeting the code for a working display sensor has been made. It can display "High Score" and "Score" along with numbers that correspond to points. The other objective that was attempted to be done during the meeting was getting the code for the three main sensors that will track points working in one single code. An issue with this is that when the touch sensor was active then the ultrasonic sensor would stop working, the ultrasonic also didn't sense when something was within a certain range of it, instead it was counting. Multiple attempts at fixing this problem were done but nothing was found to fix it. Originally the construction of the machine was supposed to be done at the machine shop but the shop was closed during the scheduled time of construction. A new time has been scheduled so there will be about an hour to 1 1/2 hours for construction. The pieces for the machine have been traced and are ready to be cut out and assembled. Once completed then the sensors can be placed and wired in preparation for the final product.